Removing and Installing Parts 137NOTE: To comply with FCC regulations, it is recommended that you replace theFlexBay drive insert whenever the floppy drive is removed from the computer.Media Card ReaderCAUTION: Before you begin any of the procedures in this section, follow thesafety instructions in the Product Information Guide.CAUTION: To guard against electrical shock, laceration by moving fan blades, orother unexpected injuries, always unplug your computer from the electrical outletbefore opening the cover.Removing a Media Card Reader1 Follow the procedures in "Before You Begin" on page 101.2 Remove the computer cover (see "Removing the Computer Cover" onpage 103).3 Remove the bezel (see "Removing the Bezel" on page 123).4 Remove the CD or DVD drive (see "Removing a CD or DVD Drive" onpage 142).5 Disconnect the FlexBay USB cable and the power cable from the back ofthe Media Card Reader and from the internal USB connector on thesystem board (see "System Board Components" on page 107).6 Press the two spring clamps and slide out the Media Card Reader alongwith the FlexBay drive cage from the FlexBay slot.1 bezel 2 insert lever 3 FlexBay drive insert123
