Back to Contents PageInverterDell™ Inspiron™ One 19 Service ManualRemoving the InverterReplacing the InverterRemoving the Inverter1. Follow the procedures in Before You Begin.2. Remove the I/O cover (see Removing the I/O Cover).3. Remove the computer stand (see Removing the Computer Stand).4. Remove the optical drive (see Removing the Optical Drive).5. Remove the decorative cover (see Removing the Decorative Cover).6. Remove the speaker cover (see Removing the Speaker Cover).7. Remove the display bezel (see Removing the Display Bezel).8. Remove the back cover (see Removing the Back Cover).9. Remove the two screws that secure the inverter shield to the system-board shield.10. Remove the inverter shield away from the computer.11. Disconnect the inverter cable and display cables from the connectors on the inverter.12. Remove the two screws that secure the inverter to the system-board shield.13. Lift the inverter out of the system-board shield.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).1 inverter shield 2 screws (2)