Dell Inspiron One 19 Touch Service Manual

Also see for Inspiron One 19: User guide Setup guide

Back to Contents PageComputer StandDell™ Inspiron™ One 19 Service ManualRemoving the Computer StandReplacing the Computer StandRemoving the Computer Stand1. Follow the procedures in Before You Begin.2. Remove the I/O cover (see Removing the I/O Cover).3. Remove the four screws that secure the computer stand to the computer.4. Lift the computer stand away from the computer.Replacing the Computer Stand1. Follow the procedures in Before You Begin.2. Align the screw holes on the computer stand with the screw holes on the computer.3. Replace the four screws that secure the computer stand to the computer.4. Replace the I/O cover (see Replacing the I/O Cover).5. Connect your computer and all attached devices to electrical outlets, and turn them on.Back to Contents PageWARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).1 screws (4) 2 computer standCAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.