Dell Inspiron One 19 Touch Service Manual

Also see for Inspiron One 19: User guide Setup guide

Back to Contents PageSpeakersDell™ Inspiron™ One 19 Service ManualRemoving the SpeakersReplacing the SpeakersRemoving the Speakers1. Follow the procedures in Before You Begin.2. Remove the I/O cover (see Removing the I/O Cover).3. Remove the computer stand (see Removing the Computer Stand).4. Remove the optical drive (see Removing the Optical Drive).5. Remove the decorative cover (see Removing the Decorative Cover).6. Remove the speaker cover (see Removing the Speaker Cover).7. Remove the display bezel (see Removing the Display Bezel).8. Remove the back cover (see Removing the Back Cover).9. Remove the I/O bracket (see Removing the I/O Bracket).10. Remove the inverter (see Removing the Inverter).11. Remove the system-board shield (see Removing the System-Board Shield).12. Disconnect the speaker cable from the connector (SPKR1) on the system board. For more information on the location of the speakers connector, seeSystem Board Components.13. Remove the four screws (two on each speaker) that secure the speakers to the chassis.14. Lift the speakers off the chassis.WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™is not covered by your warranty.CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer).NOTE: Make a note of the cable routing before you dislodge the cable.1 speaker-cable connector 2 speakers (2)