Dell Networking C9010 Getting Started Manual

Also see for Networking C9010: Installation guide

Contents

LED LED Color DescriptionSFP+ 10G uplink port 0 to 3:Link/Activity LED• Off• Solid green• Flashing green• Solid amber• Flashing amber• Flashing amber (1second on, 1 secondoff• No data link• Link is up and operational.• Link is up and transmitting/receiving data.• 1G port is up and the interface is enabled.• 1G port is transmitting/receiving data.• Port beacon used to locate SFP+ portRJ45 Management Ethernetport: Link LED• Off• Solid green•• Solid amber• No data link• Link is up and operating at maximum portspeed; if auto-negotiated, port isoperating at 1G.• Link is up and operating at lower speed; ifauto-negotiated, port is operating at10/100M.RJ45 Management Ethernetport: Activity Status LED• Off• Flashing green• No data link activity• Link is up and transmitting/receiving data.Figure 27. 40G QSFP+ Port LEDs1. 4x10G Link/Activity Port LEDs above each 40GQSFP+ port 2. Module Status LEDTable 3. 40GE QSFP+ Port LEDsLED LED Color Description40GE Port link/activityLED• Off• Solid green• Flashing green• Solid amber• Flashing amber• Flashing amber (1second on, 1second off• No link or interface is disabled.• 40G link is up and 40GE QSFP+ interface is enabled.• 40GE port is transmitting/receiving data atmaximum 40G speed.• 40G link is up but operating at lower speed (lessthan 40G).• 40GE port is transmitting/receiving data at a lowerspeed (less than 40G).36 Installing the HardwareREGULATORY DRAFT 11-4-14