NOTICE: When the diskette drive is not being used externally, remove the parallel diskette-drive cable from theparallel connector.NOTICE: Use the parallel diskette-drive cable only with the diskette drive. Do not try to connect any other deviceto the computer with this cable.The drive access indicator does not blink when data is being accessed from the diskette drive connected to the parallelconnector.NOTICE: Protect the diskette drive when it is not in the external media bay. Do not squeeze the drive or placeobjects on top of it; doing so could damage the drive motor.Advanced Port ReplicatorYou can attach your computer to the Latitude LS APR through the docking connector on the bottom of the computer. Forinformation on docking your computer, see the documentation that came with the APR.External MonitorYou can use the 15-pin video connector to attach an external monitor to the computer.Connecting an External MonitorTo attach an external monitor, perform the following steps.NOTICE: Do not place the monitor directly on top of your portable computer, even if it is closed. Doing so cancrack the computer case, the display, or both.Make sure that the external monitor is turned off. Set the monitor on a monitor stand, desk top, or other level surfacenear your computer.1.Connect the external monitor's video cable to the computer.2.Plug the video cable connector into the matching video connector on the back of the computer. If the videoConnecting External Devices: Dell Latitude LS Portable Computers User's Guidefile:///C|/Documents and Settings/Administrator/De...ew Web/Documentation/LS/LS User's Guide/exconn.htm (4 of 6) [5/31/2000 9:46:41 AM]