cable is not permanently attached to the monitor, connect it to the monitor.Be sure to tighten all the screws on the video cable connector(s) to eliminate radio frequency interference(RFI).Connect your external monitor to a grounded electrical outlet.3.Plug the three-prong connector on one end of the monitor's power cable into a grounded power strip or someother grounded power source. If the cable is not permanently attached to the monitor, connect it to the monitor.You can also connect an external monitor to the APR.NOTE: If you are using the Microsoft Windows 98 operating system, you can use an external monitoras an extension of your display. For more information, see the Windows 98 documentation or"Dual-Display Mode."Using an External MonitorWhen an external monitor is connected to the computer, the video image automatically appears on the external monitor'sscreen when you boot your computer.To toggle the video image between the display, an external monitor, or both simultaneously, press on thekeyboard. Press on an external keyboard if the External Hot-Key option is enabled in the systemsetup program.If the external monitor is turned off when you boot your computer, the computer still sends the video image to the externalmonitor, but you will not see an image on either the computer's display or the external monitor. To see an image, turn onthe external monitor or switch the video image to the computer’s display by pressing on the keyboard or Lock> on an external keyboard if the External Hot-Key option is enabled in the system setup program.NOTE: If you are using your external monitor at a resolution greater than the display supports, the simultaneousdisplay feature is disabled. To use the display, switch to a resolution that the computer supports, or disconnect theexternal monitor and restart your computer.AC AdapterYou can attach the AC adapter to the computer by using the AC adapter connector. The AC adapter converts AC power tothe DC power required by the computer.You can connect the AC adapter with your computer turned either on or off.The AC adapter works with electrical outlets worldwide. However, power connectors vary among countries. Before usingAC power in a foreign country, you may need to obtain a new power cable designed for use in that country.Audio DevicesYou can connect audio devices such as speakers, microphones, and headphones to the two audio jacks, as follows:Connect the audio cable from a microphone to the microphone jack, also called the MIC IN jack.lConnect the audio cable from speakersto the headphones/speakers jack, also called the line-out/speaker-out jack.lIf your computer is running the Windows 95 operating system, you can control the sound on your computer through theDell Control Center Speaker window, the system setup program, and key combinations.Connecting External Devices: Dell Latitude LS Portable Computers User's Guidefile:///C|/Documents and Settings/Administrator/De...ew Web/Documentation/LS/LS User's Guide/exconn.htm (5 of 6) [5/31/2000 9:46:41 AM]
