RMON Commands 321rmon collection historyThe rmon collection history Interface Configuration (Ethernet, port-channel) mode command enablesa Remote Monitoring (RMON) MIB history statistics group on an interface. Use the no form of thiscommand to remove a specified RMON history statistics group.Syntax• rmon collection history index [owner ownername] [buckets bucket-number] [interval seconds]• no rmon collection history index• index — Specifies the statistics group index. (Range: 1 - 65535)• ownername — Specifies the RMON statistics group owner name.• bucket-number — Number of buckets specified for the RMON collection history group ofstatistics. If unspecified, defaults to 50. (Range: 1 - 50)• seconds — Number of seconds in each polling cycle. (Range: 1 - 3600)Default Configuration• RMON statistics group owner name is an empty string.• Number of buckets specified for the RMON collection history statistics group is 50.• Number of seconds in each polling cycle is 1800.Command ModeInterface Configuration (Ethernet, port-channel) mode.User GuidelinesCannot be configured for a range of interfaces (range context).128 to 255 Octets The total number of packets (including bad packets) received that are between128 and 255 octets in length inclusive (excluding framing bits but including FCSoctets).256 to 511 Octets The total number of packets (including bad packets) received that are between256 and 511 octets in length inclusive (excluding framing bits but including FCSoctets).512 to 1023 Octets The total number of packets (including bad packets) received that are between512 and 1023 octets in length inclusive (excluding framing bits but includingFCS octets).1024 to 1632 Octets The total number of packets (including bad packets) received that are between1024 and 1632 octets in length inclusive (excluding framing bits but includingFCS octets).book.book Page 321 Thursday, December 18, 2008 7:40 PM
