Dell PowerConnect 3524 Cli Reference Manual

Contents

Dell PowerConnect 3524 Cli Reference Manual Manual pdf 371 page image

Spanning-Tree Commands 371User GuidelinesAll VLANs that are not explicitly mapped to an MST instance are mapped to the common and internalSpanning Tree (CIST) instance (instance 0) and cannot be unmapped from the CIST.For two or more devices to be in the same MST region, they must have the same VLAN mapping, thesame configuration revision number, and the same name.ExampleThe following example maps VLANs 10-20 to MST instance 1.name (mst)The name MST Configuration mode command defines the MST region name. Use the no form of thiscommand to return to the default setting.Syntax• name string• no name• string — MST configuration name. Case-sensitive. (Range: 1 - 32 characters)Default ConfigurationThe default name is a bridge ID.Command ModeMST Configuration mode.User GuidelinesThere are no user guidelines for this command.ExampleThe following example defines the configuration name as region1.Console(config)# spanning-tree mst configurationConsole(config-mst)# instance 1 add vlan 10-20Console(config)# spanning-tree mst configurationConsole(config-mst)# name region 1book.book Page 371 Thursday, December 18, 2008 7:40 PM