449show radius-serversUse the show radius-servers command to display the list of configured RADIUS servers and thevalues configured for the global parameters of the RADIUS client.Syntaxshow radius-servers [ accounting | authentication ] [ name [servername ]]accounting — This optional parameter will cause accounting servers to be displayed.authentication — This optional parameter will cause authentication servers to be displayed.name — This optional parameter will cause the server names to be displayed instead of theserver configuration parameters.servername — Will cause only the server(s) withserver-name name to be displayed. There areno global parameters displayed when this parameter is specified.Default ConfigurationAuthentication servers are displayed by default.Command ModePrivileged EXEC modeUser GuidelinesThe following fields are displayed:Field DescriptionConfigured AuthenticationServersThe number of RADIUS Authentication servers that have beenconfigured.Configured Accounting Servers The number of RADIUS Accounting servers that have been configured.Named Authentication ServerGroupsThe number of configured named RADIUS server groups.Named Accounting ServerGroupsThe number of configured named RADIUS server groups.Timeout The configured timeout value, in seconds, for request retransmissions.Retransmit The configured value of the maximum number of times a request packetis retransmitted.Deadtime The length of time an unavailable RADIUS server is skipped.RADIUS Accounting Mode A Global parameter to indicate whether the accounting mode for all theservers is enabled or not.
