Dell PowerConnect M6348 Cli Reference Manual

Also see for PowerConnect M6220: Release notes Configuration guide Configuration guide Release note Upgrading Firmware

Contents

Dell PowerConnect M6348 Cli Reference Manual Manual pdf 475 page image

475Syntaxspanning-tree costcostno spanning-tree cost•cost — The port path cost. (Range: 0–200,000,000)Default ConfigurationThe default cost is 0, which signifies that the cost is automatically calculated based on portspeed.• 10G Port path cost — 2000• Port Channel — 20,000• 1000 mbps (giga) — 20,000• 100 mbps — 200,000• 10 mbps — 2,000,000Command ModeInterface Configuration (Ethernet, Port-Channel) modeUser GuidelinesThere are no user guidelines for this command.ExampleThe following example configures the spanning-tree cost on 1/g5 to 35000.console(config)#interface ethernet 1/g5console(config-if-1/g5)#spanning-tree cost 35000spanning-tree disableUse the spanning-tree disable command in Interface Configuration mode to disable spanning-tree on a specific port. To enable spanning-tree on a port, use the no form of this command.Syntaxspanning-tree disableno spanning-tree disableDefault ConfigurationBy default, all ports are enabled for spanning-tree.