168 | Dell PowerConnect W-AirWave Integration and Management Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User GuideAbout Shared KeyThe Shared Secret key is used by the administrator to manually authorize the first Virtual Controller for anorganization. Any string is acceptable.Entering the Organization String and AMP Information into the IAP1. Click the Dell PowerConnect W-AirWave Set Up Now link in the bottom-middle region of the Instant UI.The Settings box with the Dell PowerConnect W-AirWave tab selected appears.Figure 130 Configuring Dell PowerConnect W-AirWave2. Enter the name of your organization in the Organization name text box. This name will automatically appearin AirWave under Groups list.3. Enter the IP address of the AirWave server in the Dell PowerConnect W-AirWave IP text box.4. Enter the shared key in the Shared key text box and reconfirm. This shared key is used for configuring the firstAP in the Dell Instant network.5. Click OK.Dell PowerConnect W-AirWave Discovery through DHCP OptionThe Dell PowerConnect W-AirWave configuration can also be performed on the DHCP option that isconfigured on the DHCP server. You can configure this only if the Dell PowerConnect W-AirWave is notconfigured earlier or have deleted the precedent configuration.On the DHCP server, the format for option 60 is “DellInstantAP”, and the format for option 43 is “ams-ip, ams-key”.Standard DHCP option 60 and 43 on Windows Server 2008 for Dell Instant APsIn networks that are not using DHCP option 60 and 43, it is easy to use the standard DHCP options 60 and 43 forDell AP or Dell Instant AP. For Dell APs these options can be used to indicate the, master controller or the localcontroller. For IAP, this can be used to define the Dell PowerConnect W-AirWave IP, group and password.1. In server 2008 go to Server Manager > Roles > DHCP sever > Your Domain DHCP Server > IPv42. Right click on IPv4 and select Set Predefined Options.
