Dell PowerConnect W-Series Instant Access Point 6.1.3.1-3.0.0.0 | User Guide Monitoring | 181InfoThe Info section provides the following information about the selected IAP: Name— Displays the name of the selected IAP. IP Address— Displays the IP address of the IAP. Mode— Displays the mode type. In Access mode the IAP serves clients, while also monitoring for rogue APsin the background. In Monitor mode, the IAP acts as a dedicated monitor, scanning all channels for rogue APsand clients. Clients— Number of clients associated with the IAP. Type— Displays the model number of the IAP. CPU Utilization— Displays the CPU utilization in percentage. Memory Free— Displays the memory availability of the IAP in Mega Bytes (MB). Serial number— Displays the serial number of the IAP.RF DashboardIn the Instant Access Point view, the RF Dashboard section is moved below the Info section. It lists the IPaddress of the clients that are associated with the selected IAP if the signal strength or the data transfer speed ofthe client is low.RF TrendsThe RF Trends display the common RF metrics for the selected access point over the past 15 minutes. The RFTrends section has two links— 2.4 GHz and 5 GHz. The 2.4 GHz link is selected by default and the followinggraphs are displayed for that band: Utilization 2.4 GHz FramesFigure 147 2.4 GHz Frames Graph Noise Floor ErrorsTo see the graphs for the 5 GHz band, click the 5 GHz link.
