iSCSI Optimization | 153Displaying iSCSI Optimization InformationUse the show commands in Table 11-2 to display information on iSCSI optimization.Figure 11-2. show iscsi Command ExampleFigure 11-3. show iscsi sessions Command ExampleTable 11-2. Displaying iSCSI Optimization InformationCommand Outputshow iscsi (Figure 11-2) Displays the currently configured iSCSI settings.show iscsi sessions (Figure 11-3) Displays information on active iSCSI sessions on the switch.show iscsi sessions detailed [session isid](Figure 11-4)Displays detailed information on active iSCSI sessions on the switch. Todisplay detailed information on specified iSCSi session, enter the session’siSCSi ID.show run iscsi Displays all globally-configured non-default iSCSI settings in the currentFTOS session.FTOS# show isciiSCSI is enablediSCSI COS : dot1p is 4 no-remarkSession aging time: 10Maximum number of connections is 256------------------------------------------------iSCSI Targets and TCP Ports:------------------------------------------------TCP Port Target IP Address3260860FTOS# show isci sessionsSession 0:-----------------------------------------------------------------------------------------Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajgISID: 400001370000Session 1:-----------------------------------------------------------------------------------------Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajgISID: 400001370000.
