164 | Layer 2w w w . d e l l . c o m | s u p p o r t . d e l l . c o mDisplaying the MAC Address TableTo display the contents of the MAC address table, use the show mac-address-table command:Network Interface Controller (NIC) TeamingNIC teaming is a feature that allows multiple network interface cards in a server to be represented by oneMAC address and one IP address in order to provide transparent redundancy, balancing, and to fully utilizenetwork adapter resources.Support for NIC teaming is auto-configured on the Aggregator, including support for:• MAC Address Station Move• MAC Address Station MoveFigure 13-1 shows a topology where two NICs have been teamed together. In this case, if the primary NICfails, traffic switches to the secondary NIC, because they are represented by the same set of addresses.Task Command Syntax Command ModeClear a MAC address table of dynamic entries.• address deletes the specified entry• all deletes all dynamic entries• interface deletes all entries for the specifiedinterface• vlan deletes all entries for the specified VLANclear mac-address-table dynamic{address | all | interface | vlan} EXEC PrivilegeTask Command Syntax CommandModeDisplay the contents of the MAC address table.• address displays the specified entry.• aging-time displays the configured aging-time.• count displays the number of dynamic and static entriesfor all VLANs, and the total number of entries.• dynamic displays only dynamic entries• interface displays only entries for the specified interface.• static displays only static entries.• vlan displays only entries for the specified VLAN.show mac-address-table [address |aging-time [vlan vlan-id]| count |dynamic | interface | static | vlan]EXEC Privilege
