42 | Aggregator Managementw w w . d e l l . c o m | s u p p o r t . d e l l . c o mDisplaying the Logging Buffer and Logging ConfigurationTo display the current contents of the logging buffer and the logging settings for the system, enter the showlogging command in EXEC privilege mode (Figure 5-1).Figure 5-1. show logging Command ExampleTo view any changes made, use the show running-config logging command (Figure 5-2) in the EXECprivilege mode.FTOS#show loggingSyslog logging: enabledConsole logging: level debuggingMonitor logging: level debuggingBuffer logging: level debugging, 58 Messages Logged, Size (40960 bytes)Trap logging: level informationalLogging to 172.31.1.4Logging to 172.16.1.162Logging to 133.33.33.4Logging to 10.10.10.4Logging to 10.1.2.4May 20 20:00:10: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.5 )by adminMay 20 19:57:45: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication success on vty0 ( 10.11.68.5 )May 20 19:57:40: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for useradmin on vty0 (10.11.68.5)May 20 19:37:08: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line vty0 (10.11.68.5)May 20 18:59:36: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.5 )by adminMay 20 18:45:44: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication success on vty0 ( 10.11.68.5 )May 20 18:45:39: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for useradmin on vty0 (10.11.68.5)May 20 17:18:08: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line vty0 (10.11.68.5)May 20 16:42:40: %STKUNIT0-M:CP %SYS-5-CONFIG_I: Configured from vty0 ( 10.11.68.5 )by admin- repeated 2 timesMay 20 16:37:41: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication success on vty0 ( 10.11.68.5 )May 20 16:37:28: %STKUNIT0-M:CP %SEC-5-LOGIN_SUCCESS: Login successful for useradmin on vty0 (10.11.68.5)May 20 16:37:17: %STKUNIT0-M:CP %SEC-5-LOGOUT: Exec session is terminated for user admin on line vty0 (10.11.68.5)May 20 16:37:08: %STKUNIT0-M:CP %SEC-3-AUTHENTICATION_ENABLE_SUCCESS: Enable password authentication success on vty0 ( 10.11.68.5 )sword authentication success on vty0 ( 10.11.68.5 )--More--
