System Time and Date | 229Setting Recurring Daylight Saving TimeSet a date (and time zone) on which to convert the switch to daylight savings time on a specific day everyyear.If you have already set daylight savings for a one-time setting, you can set that date and time as therecurring setting using the clock summer-time time-zone recurring command.To set a recurring daylight saving time, use the following command:Command Syntax Command Mode Purposeclock summer-time time-zonerecurring start-week start-daystart-month start-time end-weekend-day end-month end-time [offset]CONFIGURATION Set the clock to the appropriate timezone and adjust todaylight savings time every year.• time-zone: Enter the three-letter name for the timezone. This name is displayed in the show clockoutput.• start-week: (OPTIONAL) Enter one of the followingas the week that daylight savings begins and thenenter values for start-day through end-time:• week-number: Enter a number from 1-4 as thenumber of the week in the month to start daylightsavings time.• first: Enter this keyword to start daylight savings timein the first week of the month.• last: Enter this keyword to start daylight savings timein the last week of the month.• start-month: Enter the name of one of the 12 monthsin English. You can enter the name of a day to changethe order of the display to time day month year.• start-day: Enter the number of the day. Range: 1 to31. You can enter the name of the month to changethe order of the display to time day month year.• start-year: Enter a four-digit number as the year.Range: 1993 to 2035• start-time: Enter the time in hours:minutes. For thehour variable, use the 24-hour format, example, 17:15is 5:15 pm.
