752 VLAN Commandsvlan protocol group add protocolUse the vlan protocol group add protocol command in Global Configurationmode to add a protocol to the protocol-based VLAN groups identified bygroupid. A group may have more than one protocol associated with it. Eachinterface and protocol combination can be associated with one group only. Ifadding a protocol to a group causes any conflicts with interfaces currentlyassociated with the group, this command fails and the protocol is not addedto the group.To remove the protocol from the protocol-based VLAN group identified bygroupid, use the no form of this command.Syntaxvlan protocol group add protocolgroupid ethertypevalueno vlan protocol group add protocolgroupid ethertypevalue•groupid — The protocol-based VLAN group ID, which is automaticallygenerated when you create a protocol-based VLAN group with the vlanprotocol group command. To see the group ID associated with the nameof a protocol group, use the show port protocol all command.• ethertypevalue — The protocol you want to add. The ethertype value canbe any valid hexadecimal number in the range 0x0600 to 0xffff.Default ConfigurationThis command has no default configuration.Command ModeGlobal Configuration modeUser GuidelinesThis command has no user guidelines.ExampleThe following example displays how to add the "ip" protocol to the protocolbased VLAN group identified as "2."
