106 About Your SystemE1311 Fan module ##RPM exceedingrange. Checkfan.Speed of the specified fanin specified module isoutside of intendedoperating range.See "Troubleshooting FanModules" on page 315.E1313 Fanredundancylost. Checkfans.The system is no longer fanredundant. Another fanfailure would put thesystem at risk of over-heating.Check LCD for additionalscrolling messages. See"Troubleshooting FanModules" on page 315.E1410 InternalErrordetected.Check "FRUX".Specified processor has aninternal error. The errormay or may not have beencaused by the processor.Remove AC power to thesystem for 10 seconds andrestart the system.If the problem persists,see "Getting Help" onpage 361.E1414 CPU # tempexceedingrange. CheckCPU heatsink.Specified processor is out ofacceptable temperaturerange.Ensure that the processorheat sinks are properlyinstalled. See"TroubleshootingProcessors" on page 322and "Troubleshooting FanModules" on page 315.E1418 CPU # notdetected.Check CPU isseatedproperly.Specified processor ismissing or bad, and thesystem is in an unsupportedconfiguration.Ensure that the specifiedprocessor is properlyinstalled. See"TroubleshootingProcessors" on page 322.E141C UnsupportedCPUconfigurationCheck CPU orBIOSrevision.Processors are in anunsupported configuration.Ensure that yourprocessors match andconform to the typedescribed in the processortechnical specificationsoutlined in your system’sGetting Started Guide.Table 1-26. LCD Status Messages(continued)Code Text Cause Corrective Actions
