Installing Enclosure Components 305Installing the Enclosure Control PanelCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Connect the LCD panel cable to the new control panel.2 Connect the control panel cable to the underside of the new control panel.3 Reinstall the control panel using the two screws.4 Reinstall the bezel. See "Installing the Enclosure Bezel" on page 299.5 Install the blades. See "Installing a Blade" on page 158.LCD ModuleRemoving the LCD ModuleCAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and simple repairs as authorized in yourproduct documentation, or as directed by the online or telephone service andsupport team. Damage due to servicing that is not authorized by Dell is not coveredby your warranty. Read and follow the safety instructions that came with theproduct.1 Rotate the LCD module so that the underside of the module facesupward. See Figure 4-11.
