150 Using the System Setup Program and UEFI Boot ManagerEntering the UEFI Boot Manager1 Turn on or restart your system.2 Press after you see the following message: = UEFI Boot ManagerNOTE: The system does not respond until the USB keyboard is active.NOTE: The Boot Mode option in System Setup must be set to UEFI to accessthe UEFI Boot Manager.If your operating system begins to load before you press , allow thesystem to finish booting, and then restart your system and try again.UEFI Boot Manager ScreenUEFI Boot Settings ScreenOption DescriptionContinue Selecting this option executes the current boot optionsin listed order.<Boot options> The list of current boot options is displayed, with anasterisk. Select the boot option you wish to use andpress .UEFI Boot Settings Enables you to add, delete, enable, disable, and changeboot options, or execute a one-time boot option.System Utilities Enables you to access the legacy System Setup program,System Services, and BIOS-level boot options.Option DescriptionAdd Boot Option Adds a new boot option.Delete Boot Option Deletes an existing boot option.Enable/Disable BootOptionDisables and enables a boot option in the boot optionlist.Change Boot Option Changes the order of the boot option list.One-Time Boot From File Sets a one-time boot option not included in the bootoption list.
