3 display module cable 4 LCD control panel board5 USB connector cable 6 standoff on the chassis (2)Next steps1 Install the LCD control panel assembly.2 Follow the procedure listed in the After working inside your system section.Related linksInstalling the LCD control panel assemblyInstalling the LCD control panel assemblyPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simplerepairs as authorized in your product documentation, or as directed by the online or telephone service and support team.Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1 Follow the safety guidelines listed in Safety instructions section.2 Follow the procedure listed in the Before working inside your system section.3 Keep the Phillips #2 screwdriver ready.Steps1 Align the tabs on the control panel with the notches on the chassis.2 Route the LCD cable through the cable retention clip.3 Push the control panel toward the chassis until it snaps into place.4 Align and install the LCD control panel board.5 Secure the board in place with screws.Figure 77. Installing the LCD control panel—four 3.5-inch hot swappable hard drive chassis1 LCD control panel 2 notches (6)3 display module cable retention clip 4 display module cableInstalación y extracción de los componentes del sistema 127
