Figure 19. Removing the intrusion switch1 intrusion switch 2 intrusion switch slot3 intrusion switch cable 4 intrusion switch connector on the system board5 cable routing clip (2)Next steps1 Install the intrusion switch.2 Follow the procedure listed in Después de manipular el interior del sistemaRelated linksInstalling the intrusion switchInstalling the intrusion switchPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simplerepairs as authorized in your product documentation, or as directed by the online or telephone service and support team.Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1 Ensure that you follow the Instrucciones de seguridad.2 Follow the procedure listed in Antes de trabajar en el interior de su equipo.Steps1 Slide the intrusion switch into the intrusion switch slot.2 Route the intrusion switch cable through the cable routing clips.3 Connect the intrusion switch cable to the connector on the system board.Instalación y extracción de los componentes del sistema 63
