Unidad de fuentede alimentaciónEspecificación1039 BTU/h como máximo (fuente de alimentación de 250 W)Tensión NOTA: Este sistema ha sido diseñado también para que se conecte a sistemas de alimentación de TI conun voltaje entre fases no superior a 230 V.100–240 V CA, autoajustable, 50/60 HzStorage controller specificationsStoragecontrollerSpecificationStorage controllertypePERC H730, PERC H330, PERC H830, PERC S130.NOTE: Your system supports software RAID S130 and a PERC card.For more information on software RAID, see the Dell PowerEdge RAID Controller (PERC) documentation atDell.com/storagecontrollermanuals.NOTE: The upgrade from embedded controller or Software RAID controller to Hardware RAID controlleris not supported.Especificaciones de la unidadHard drivesThe PowerEdge R230 system supports SAS, SATA, Nearline SAS hard drives and Solid State Drives (SSDs).Drives SpecificationFour hard drivesystemsUp to four 3.5-inch cabled hard drives, orUp to four 2.5-inch hot swappable SATA, or Nearline SAS hard drives in 3.5-inch adapters, orUp to four 3.5-inch hot swappable SATA, or Nearline SAS hard drivesTwo hard drivesystemsUp to two 3.5-inch cabled hard drivesOptical driveThe PowerEdge R230 system supports one optional slim SATA DVD-ROM drive or DVD+/-RW drive.Especificaciones de puertos y conectoresUSB portsThe PowerEdge R230 system supports:Especificaciones técnicas 29
