Figure 28. Removing a cabled hard drive carrier1 hard drive 2 power/data cable3 release tab 4 hard drive carrierNext steps1 If required, install a hard drive in the hard drive carrier and install the hard drive carrier into the hard drive slot in the system.2 If you are not replacing the hard drive immediately, insert a hard drive carrier in the empty hard drive slot.3 Follow the procedure listed in Después de manipular el interior del sistema.Related linksRemoving a cabled hard drive from a hard drive carrierInstalling a cabled hard drive into a hard drive carrierInstalling a 3.5-inch cabled hard drive carrierRemoving a cabled hard drive from a hard drive carrierPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simplerepairs as authorized in your product documentation, or as directed by the online or telephone service and support team.Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat are shipped with your product.1 Ensure that you follow the Instrucciones de seguridad.2 Follow the procedure listed in Antes de trabajar en el interior de su equipo.3 Remove the cabled hard drive carrier.4 Keep the Phillips #2 screwdriver ready.Steps1 Remove the screws from the side of the cabled hard drive carrier.2 Remove the hard drive from the hard drive carrier.Instalación y extracción de los componentes del sistema 75
