Figure 40. Removing and Installing a Processor1. processor2. processor shield3. notches in processor (2)NOTE: After removing the processor, place it in an antistatic container for reuse, return, or temporary storage.Do not touch the bottom of the processor. Touch only the side edges of the processor.Installing A ProcessorCAUTION: Many repairs may only be done by a certified service technician. You should only performtroubleshooting and simple repairs as authorized in your product documentation, or as directed by the online ortelephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by yourwarranty. Read and follow the safety instructions that came with the product.1. Before upgrading your system, download the latest system BIOS version from dell.com/support and follow theinstructions included in the compressed download file to install the update on your system.NOTE: You can update the system BIOS using the Lifecycle Controller.2. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. Whendisconnected from the power source, press and hold the power button for three seconds to fully drain the systemof stored power prior to removing the cover.3. Open the system.78
