66 Using the System Setup Program and UEFI Boot ManagerIntegrated Devices ScreenHard-Disk DriveSequenceDetermines the order in which the BIOS attempts toboot from hard drives in the system during systemstartup.USB Flash DriveEmulation TypeDetermines the emulation type for a USB flash drive. IfBoot Mode is set to UEFI, this field is disabled.Boot Sequence Retry(Disabled default)If this field is enabled and the system has failed to boot,the system reattempts to boot after 30 seconds.Option DescriptionIntegrated SAS Controller(Enabled default)Enables or disables the integrated SAS controller.User Accessible USB Ports(All Ports On default)Enables or disables the user accessible USB ports.Options are All Ports On, Only Back Ports On, and AllPorts Off.Internal USB Port(On default)Enables or disables the internal USB port.Internal SD Card Port(On default)Enables or disables the internal SD card port.Redundancy(Disabled default)Enables or disables the mirror mode.Embedded NIC1 andNIC2(Enabled default)Enables or disables the operating system interface of theembedded NICs. The NICs can also be accessed throughthe system's management controller.Embedded Gb NICx(Enabled default)Enables or disables the integrated NIC. Options areEnabled and Enabled with PXE. PXE support allows thesystem to boot from the network.MAC Address Displays the MAC address for the integrated 10/100/1000NIC.Capability Detected(Disabled default)Displays the NIC features of the LOM NIC hardware key.NOTE: Some LOM features may require the installation ofan additional driver.Option Description
