68 Using the System Setup Program and UEFI Boot ManagerEmbedded Server Management ScreenExternal Serial Connector Specifies whether Serial Device 1, Serial Device 2, orRemote Access Device has access to the external serialconnector.NOTE: Only Serial Device 2 can be used for Serial OverLAN (SOL). To use console redirection by SOL, configurethe same port address for console redirection and theserial device.Failsafe Baud Rate(115200 default)Displays the failsafe baud rate used for consoleredirection. BIOS attempts to determine the baud rateautomatically. This failsafe baud rate is used only if theattempt fails. This rate should not be adjusted.Remote Terminal Type(VT 100/VT220 default)Sets the remote console terminal type, eitherVT100/VT220 or ANSI.Redirection After Boot(Enabled default)Enables or disables BIOS console redirection when theoperating system is loaded.Option DescriptionFront-Panel LCDOptionsOptions are User Defined String, Model Number, orNone.If the LCD Home screen is set to an option other thanthese three choices, the option will be displayed as"Advanced" in the BIOS. In this event, the option cannotbe changed in the BIOS unless it is changed back to UserDefined String, Model Number, or None throughanother LCD configuration utility (such as the iDRAC6Configuration Utility or the LCD panel menu).User-Defined LCDStringYou can enter a name or other identifier for the system, tobe displayed on the LCD module screen.Option Description
