Item Button Description• Press once to increasescrolling speed• Press again to stop• Press again to return to thedefault scrolling speed• Press again to repeat thecycleHome screenThe Home screen displays user-configurable information about the system. This screen is displayedduring normal system operation when there are no status messages or errors. When the system is instandby mode, the LCD backlight turns off after five minutes of inactivity if there are no error messages.Press one of the three navigation buttons (Select, Left, or Right) to view the Home screen.To navigate to the Home screen from another menu, follow the steps below.1. Press and hold the up arrow until the Home icon is displayed.2. Select the Home icon.3. From the Home screen, press the Select button to enter the main menu.Setup menuNOTE: When you select an option in the Setup menu, you must confirm the option beforeproceeding to the next action.Option DescriptioniDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected,the available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS toenable DNS and to view domain addresses. Two separate DNS entries are available.Set error Select SEL to display LCD error messages in a format that matches the IPMIdescription in the SEL. This is useful when trying to match an LCD message with anSEL entry.Select Simple to display LCD error messages in a simplified user-friendlydescription. For more information on error messages, see the Dell Event and ErrorMessages Reference Guide at dell.com/esmmanuals.Set home Select the default information to be displayed on the LCD Home screen. See Viewmenu to see the options and option items that can be set as the default on theHome screen.12
