3. cable management trayNext stepsInstall the cable management tray.Related TasksRemoving a memory riserRemoving a cooling fanRemoving the memory riser and fan cageRemoving a memory riser blankInstalling the cable management trayInstalling the cable management trayPrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.Ensure that you follow the Safety instructions.Steps1. Position the cable management tray above the heat sinks.2. Lower one end of the cable management tray, and insert the cable management tray hooks into theslots on the side of the chassis.3. Lower the other end of the cable management tray, and press the cable management tray hooks sothat they snap into the slots on the side of the chassis.4. Open the cable management tray by using the release tab.5. Route the cables through the cable management tray.6. Close the cable management tray.Next steps1. Install the following:a. Memory riser and fan cageb. Cooling fansc. Memory risersd. Memory riser blanks, if removed2. Follow the procedure listed in After working inside your system.Related TasksInstalling the memory riser and fan cageInstalling a cooling fanInstalling a memory riserInstalling a memory riser blank55
