Thermal SensorRemoving The Thermal SensorCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from theelectrical outlet and peripherals.2. Lay the system on its side, on a flat and stable surface.3. Open the system.4. Disconnect the thermal-sensor connector from the system board.5. Remove the thermal-sensor cable from the chassis clip.6. Press the tabs on the thermal sensor and remove the thermal sensor from the chassis.Figure 9. Removing and Installing the Thermal Sensor1. thermal sensor 2. tabs (2)3. chassis clip 4. thermal-sensor connectorInstalling The Thermal SensorCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Turn off the system, including any attached peripherals, and disconnect the system from theelectrical outlet and peripherals.2. Lay the system on its side, on a flat and stable surface.3. Open the system.30
