Dell PowerEdge T630 Owner's Manual

Also see for PowerEdge T630: Owner's manual Getting started Owner's manual

Contents

Figure 36. Removing and installing a processor1. close first socket-release lever 2. pin-1 indicator of processor3. processor 4. slot (4)5. processor shield 6. open first socket-release lever7. socket 8. socket keys (4)d. Hold the tab on the processor shield and lift the processor shield until the open first socket-release lever lifts up.CAUTION: The socket pins are fragile and can be permanently damaged. Be careful not tobend the pins in the socket when removing the processor out of the socket.e. Lift the processor out of the socket and leave the open first socket-release lever up.NOTE: If you are permanently removing the processor, you must install a socket protectivecap in the vacant socket to protect the socket pins and keep the socket free of dust.NOTE: After removing the processor, place it in an anti-static container for reuse, return, ortemporary storage. Do not touch the bottom of the processor. Touch only the side edges ofthe processor.Next steps1. Replace the heat sink(s) and processor(s). See Installing a processor.2. Follow the procedure listed in After working inside your system.101