Item Indicator, button, orconnector Icon DescriptionIntegrated Dell Remote Access Controller User'sGuide at dell.com/esmmanuals.This port is USB 2.0-compliant9 VGA connector Allows you to connect a VGA display to thesystem.NOTE: The VGA connector is available only inthe rack-mode configuration of your system.For information on converting your systemfrom tower to the rack mode, see Preparing asystem for conversion from tower mode torack mode .10 USB connector Allows you to connect USB devices to the system.This port is USB 3.0-compliant.11 Optical drive or tape-drive bayAllows you to install optical drives or tape drives.For more information on supported optical drivesand tape drives, see Optical drives and tape drives.12, 14, 15 Physical drives 3.5 inch hard drives, 2.5 inch hard drives, and PCIeSSDs13 Flex Bay Supports up to four PCIe SSDs or up to sixteen 2.5inch hard drives depending on the systemconfiguration.LCD panel featuresThe LCD panel of your system provides system information and status and error messages to indicate ifthe system is operating correctly or if the system needs attention. For more information on errormessages, see the Dell Event and Error Messages Reference Guide at dell.com/esmmanuals.• The LCD backlight lights blue during normal operating conditions and lights amber to indicate anerror condition.• The LCD backlight is off when the system is in standby mode and can be turned on by pressing eitherthe Select, Left, or Right button on the LCD panel.• The LCD backlight remains off if LCD messaging is turned off through the iDRAC utility, the LCDpanel, or other tools.13