Menu Item DescriptionWhen In-System Characterization (ISC) is set toenabled, ISC is executed during POST on detectingrelevant change(s) in the system configuration.This helps in optimizing the system power andperformance. ISC takes about 20 seconds to beexecuted, and system reset is required for ISCresults to be applied. The Enabled - No Rebootoption executes ISC and continues withoutapplying ISC results until the next time systemreset occurs. The Enabled option executes ISC andforces an immediate system reset so that ISCresults can be applied. It takes the system longer tobe ready due to the forced system reset. Whendisabled, ISC is not executed.About Boot ManagerBoot Manager enables you to add, delete, and arrange boot options. You can also access System Setupand boot options without restarting the system.Entering Boot ManagerThe Boot Manager screen enables you to select boot options and diagnostic utilities.1. Turn on, or restart your system.2. Press F11 when you see the message F11 = Boot Manager.If your operating system begins to load before you press F11, allow the system to finish booting, andthen restart your system and try again.Boot Manager main menuMenu Item DescriptionContinue Normal Boot The system attempts to boot to devices startingwith the first item in the boot order. If the bootattempt fails, the system continues with the nextitem in the boot order until the boot is successfulor no more boot options are found.One Shot Boot Menu Takes you to the boot menu, where you can selecta one time boot device to boot from.Launch System Setup Enables you to access System Setup.Launch Lifecycle Controller Exits the Boot Manager and invokes the LifecycleController program.42
