Convention IDSDM indicator code DescriptionC Flashing amber Indicates card mismatch or that the card hasfailedD Amber Indicates that the card is offline, has failed, or iswrite protectedE Not lit Indicates that the card is missing or is bootingNext stepsFollow the procedure listed in After working inside your system.Installing the internal dual SD modulePrerequisitesCAUTION: Many repairs may only be done by a certified service technician. You should onlyperform troubleshooting and simple repairs as authorized in your product documentation, or asdirected by the online or telephone service and support team. Damage due to servicing that isnot authorized by Dell is not covered by your warranty. Read and follow the safety instructionsthat came with the product.1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.Steps1. Locate the IDSDM connector on the system board. To locate the IDSDM connector, see .2. Align the connectors on the system board and the dual SD module.3. Push the dual SD module until it is firmly seated on the system board.Next steps1. Install the SD card(s).NOTE: Temporarily label each SD card with its corresponding slot before removal. Replace theSD card(s) into the same slots.2. Follow the procedure listed in .After working inside your systemInternal SD cardRemoving an internal SD cardPrerequisites1. Ensure that you read the Safety instructions.2. Follow the procedure listed in Before working inside your system.96
