cfgSessionManagementThis group contains parameters to configure the number of sessions that can connect to iDRAC. One instance of thegroup is allowed. Displays current settings for and configures idle timeout properties for Web server, Telnet, SSH, andRACADM sessions. Changes to idle timeout settings take effect at the next login. To disable idle timeout for aconnection, set this property to 0.The following sections provide information about the objects in the cfgSessionManagement group.cfgSsnMgtRacadmTimeout (Read/Write)Description Defines the idle timeout in seconds for the Remote RACADM interface. If a remote RACADM sessionremains inactive for more than the specified sessions, the session closes.Legal Values 10 –1920Default iDRAC - 60CMC - 30Exampleracadm getconfig -g cfgSessionManagement cfgSsnMgtWebserverTimeout=0cfgSsnMgtTelnetIdleTimeout=0cfgSsnMgtSshIdleTimeout=300cfgSsnMgtRacadmTimeout=0cfgSsnMgtWebserverTimeout (Read/Write)Description Defines the Web server time-out. This property sets the amount of time (inseconds) that a connection is allowed to remain idle (there is no user input). Thesession is cancelled if the time limit set by this property is reached. Changes tothis setting do not affect the current session. You must log out and log in again tomake the new settings effective.An expired Web server session logs out the current session.Legal Values 60 – 10800Default 1800cfgSerialThis group contains configuration parameters for CMC services. One instance of the group is allowed.Use this object with the getconfig or config subcommands.To use this object property, you must have the Chassis Configuration Administrator privilege.The following sections provide information about the objects in the cfgSerial group.NOTE: The cfgSerial object group is applicable for iDRAC Enterprise on server modules for only two properties—cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.113
