3CMC Property Database Group and ObjectDescriptionsThe CMC property database contains the configuration information for CMC. Data is organized by associated object, andobjects are organized by object group. The IDs for the groups and objects that the property database supports are listedin this section for CMC.Use the group and object IDs with the RACADM subcommands to configure CMC.NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify aconfigurable object, use the -o option.NOTE: RACADM sets the value of objects without performing any functional validation on them. For example,RACADM allows you to set the Certificate Validation object to 1 with the Active Directory object set to 0, eventhough Certificate Validation can happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable objectcan be set to 0 or 1 even if the cfgADEnable object is 0, but it takes effect only if Active Directory is enabled.All string values are limited to displayable ASCII characters, except where otherwise noted.idRacInfoThis group contains display parameters to provide information about the specifics of CMC being queried. One instanceof the group is allowed.Use this object with the getconfig subcommand.To use this object, you must have CMC Login User privilege.The following sections provide information about the objects in the idRACInfo group.idRacProductInfo (Read Only)Description A text string that identifies the product.Legal Values A string of up to 63 ASCII characters.Default for iDRAC Integrated Dell Remote Access Controller.Default for CMC Chassis Management Controller.idRacDescriptionInfo (Read Only)Description A text description of the RAC type.Legal Values A string of up to 255 ASCII characters.Default This system component provides a complete set of remotemanagement functions for Dell PowerEdge servers.99
