• chassis• CMC activeExample For CMC:• racadm getled -m server-10<module> <LED state> server-10 Blinking• racadm getled -m chassis<module> <LED state> server-10 Not blinking• racadm getled -m server-1<module> <LED state> server-1 ON• racadm getled -m server-9<module> <LED state> server-9 Extension(1)getmacaddressDescription Displays the MAC/WWN addresses for all modules or for a specified module.To use this subcommand, you must have the CMC Login User privilege.Synopsis • racadm getmacaddress [-m <module>] [-t iscsi] [-x]• racadm getmacaddress [-a]Input • -m <module> — Specifies the module whose MAC address you want to view.<module> may be one of the following:server-n, wheren=1–4switch-n, wheren=1• -t — Displays the iSCSI MAC addresses for all servers or the specified server if used with -m option.• -x — Displays the extra MACs (Ethernet or iSCSI) for servers with additional LOM MACsand must be used with -m option.• -a — Displays the Ethernet and iSCSI MAC/WWN addresses for all iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for a particular slot, then the chassis-assigned MAC/WWN address is displayed.ExampleDisplay iSCSI MAC addresses for all servers.racadm getmacaddress -t iscsiDisplay iSCSI MAC for server-1.racadm getmacaddress -m server-1 -t iscsiDisplay extra iSCSI MACs for server-1 (if available).racadm getmacaddress -m server-1 -t iscsi -xDisplay MAC for server-1.racadm getmacaddress -m server-140
