Dell PowerVault 50F Installation And Troubleshooting Manual

Also see for PowerVault 50F: Connection guide User guide Install guide Installation and troubleshooting guide User guide

Contents

Dell PowerVault 50F Installation And Troubleshooting Manual Manual pdf 140 page image

A-2 Installation and Troubleshooting GuideFigure A-1. errShow Command ExampleTo display error messages via Telnet:1. From the prompt, type errShow.2. To scroll through the error list, type CR.3. Scroll through the error log (if no errors were encountered, the message NoError appears).Error Messages by Firmware ModuleTable A-1 shows the error messages organized by module.=> errShowError 02--------0x103dc470 (tSilkworm): Apr 9 10:41:06Error SENSOR-FAILED, 3, sensor 7 (Fan 2) is below minimType to continue, Q to stop:Error 01--------0x103dc470 (tSilkworm): Apr 9 10:40:51Error DIAG-TIMEOUT, 1,Port 2 receive timeout.Type to continue, Q to stop:value = 1 = 0x1Table A-1. ErrorsModuleErrorSeverity Explanation ActionFlood INVLSR (3) An unknown LinkState Record hasbeen receivedfrom a neighborswitch.Check that all paths androuting tables are correctusing the commandsuPathShow , oruPathAllShow.If the paths are not correctreboot the neighbor switchthat sent the wrong data.Check the paths and routesagain. If they are still incor-rect, reboot the local switch.