• General• File System• Networking• Performance• Protocols - collect logs• Protocols - single client• Protocols - single fileTo run any of these diagnostics:1. Select Cluster Management → Maintenance → Diagnostics.The Diagnostics page is displayed.2. From the Diagnostics type list, select the appropriate option and click Start.On completion of the diagnostics, links to the compressed archive of diagnostic files are displayed.3. Click the appropriate link under Download diagnostics archive files.A message prompts you to either open or save the selected diagnostics file.4. Click Done.Offline DiagnosticsNOTE: Connect a keyboard and monitor before you perform the following procedure.Offline diagnostics requires your solution to be offline, which means out of production and not serving data. This isgenerally helpful to troubleshoot low-level hardware issues.It uses the following Dell native tools:• MP Memory• Dell DiagnosticsMP MemoryMP Memory is a Dell-developed, MS DOS-based memory test tool. This tool is efficient for large (greater than 4 GB)memory configurations. The tool supports single-processor or multiprocessor configurations, as well as processorsusing the Intel Hyper-Threading Technology.MP Memory operates only on controllers that are Intel processor-based. This tool complements Dell 32-Bit Diagnosticstests and helps provide complete, comprehensive diagnostics on the controller in a pre-operating system environment.Running The Embedded System DiagnosticsCAUTION: Use the embedded system diagnostics to test only your system. Using this program with other systemsmay cause invalid results or error messages.1. Connect a keyboard, monitor, and mouse to the controller's VGA port and USB ports.2. To reboot the controller, press and release the power button (at the back of the controller) to shut down thecontroller and press and release the power button (at the back of the controller) again to turn the controller backon.3. As the system boots, press .4. Use the arrow keys to select System Utilities → Launch Dell Diagnostics.The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. Thediagnostics starts executing the tests on all the detected devices.5. When completed, remove the keyboard, monitor, and mouse from the controller and reboot the controller.104
