Replication Jumbo Frames BlockedDescription Replication between the NAS source volume and NASdestination volume fails because the jumbo frames areblocked over the network.Cause Replication task fails because jumbo frames are blockedover the network.Workaround The administrator must verify that the networkconfiguration between the source cluster and thedestination cluster has enabled transferring jumbo framesacross the switches or routers.Replication Destination Does Not Have Enough SpaceDescription Replication between NAS source volume and NASdestination volume fails because there is not enoughspace in the destination NAS volume.Cause Replication task fails because there is not enough spacein the destination NAS volume.Workaround Increase the space of the destination NAS volume.Replication Source Is BusyDescription Replication between the NAS source volume and the NASdestination volume fails because the file system of thesource NAS volume is busy replicating other NASvolumes.Cause Replication task fails because the file system of thesource NAS volume is busy replicating other NASvolumes.Workaround The replication continues automatically when the filesystem releases part of the resources. The administratorsmust verify that the replication automatically continuesafter a period of time (an hour).Replication Source Is DownDescription Replication between the NAS source volume and the NASdestination volume fails because the file system of sourceNAS volume is down.Cause The file system of the source NAS volume is down.Workaround Administrators must check if the NAS cluster solution isdown in the source system, by checking the monitoringsection of the NAS Manager. If the NAS cluster solution isdown, the administrators must start the file system on thesource cluster. The replication continues automaticallywhen the file system starts.84
