The feature(s) from the license file are displayed on the licensing screen after the system validates the file and refreshesthe screen.1. Select Cluster Management → General → Licensing.The Licensed Features page displays a list of installed licenses.2. From the list of installed licenses, select the appropriate feature and click Delete License for feature.Configuring E-mail Parameters On PowerVault NX3500/NX3600/NX3610 NAS SolutionsNOTE: This feature is not supported on Dell Compellent FS8600 NAS Solutions. Dell Compellent FS8600 utilizesEnterprise Manager for all e-mail alerts. For more information, see theEnterprise Manager Users Guide.Dell Fluid File System uses e-mail as the basis for alerting and remote support. You can determine who receives one orall of the following types of messages that Dell Fluid File System sends:• Heartbeats—Heartbeats are sent every five minutes to the e-mail recipient. This enables the remote supportteam to respond to system failures.• System logs—System logs are periodically sent to the e-mail recipient. This enables the remote support team toidentify mild system errors and correct them if necessary.• Alerts—Alert e-mail messages that report on the system service.You can add additional recipients if necessary. If you add the Administrator as a recipient, it is recommended that youconfigure the system to only send them system alerts.You can also manually request the system to send a system information report, as required.Viewing SMTP ServersTo view the list of configured SMTP servers, select Cluster Management → Monitoring Configuration → EmailConfiguration, the Email Configuration page displays the list of configured SMTP servers.Configuring An SMTP ServerSMTP servers let you send e-mail to users who are not in the same domain. An SMTP server lets you forward trapmessages from the customer's domain to a remote support mailbox.To add SMTP servers:1. Select Cluster Management → Monitoring Configuration → Email Configuration.The Email Configuration page is displayed. By default, the General tab is selected.2. Click Add SMTP server.The Add SMTP server page is displayed.3. In SMTP server, enter the IP address or name of the e-mail server.4. In Description, enter a description of the server.5. Select The SMTP server requires authentication to authenticate all e-mail on the SMTP server using the usernameand password that you enter in User name and Password.6. Click Save Changes.68
