Menu Item DescriptionVirtualizationTechnologyAllows you to enable or disable the additional hardware capabilities provided for virtualization.By default, the Virtualization Technology option is set to Enabled.Adjacent Cache LinePrefetchAllows you to optimize the system for applications that require high utilization of sequentialmemory access. By default, the Adjacent Cache Line Prefetch option is set to Enabled. You candisable this option for applications that require high utilization of random memory access.Hardware Prefetcher Allows you to enable or disable hardware prefetcher. By default, the Hardware Prefetcheroption is set to Enabled.DCU StreamerPrefetcherAllows you to enable or disable Data Cache Unit streamer prefetcher. By default, the DCUStreamer Prefetcher option is set to Enabled.DCU IP Prefetcher Allows you to enable or disable Data Cache Unit IP prefetcher. By default, the DCU IPPrefetcher option is set to Enabled.Execute Disable Allows you enable or disable execute disable memory protection technology. By default, theExecute Disable option is set to Enabled.Number of Cores perProcessorAllows you to control the number of enabled cores in each processor. By default, the Numberof Cores per Processor option is set to All.Processor 64-bitSupportSpecifies if the processor(s) support 64-bit extensions.Processor CoreSpeedDisplays the maximum core frequency of the processor.Processor 1 NOTE: The following settings are displayed for each processor installed in the system.Family-Model-SteppingDisplays the family, model and stepping of the processor as defined by Intel.Brand Displays the brand name reported by the processor.Level 2 Cache Displays the total L2 cache.Level 3 Cache Displays the total L3 cache.Number of Cores Displays the number of cores per processor.SATA Settings ScreenMenu Item DescriptionEmbedded SATA Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID mode. By default, EmbeddedSATA is set to AHCI Mode.Port A Auto enables BIOS support for the device attached to SATA port A. By default, Port A is set toAuto.Port B Auto enables BIOS support for the device attached to SATA port B. By default, Port B is set toAuto.21
