Menu Item DescriptionBIOS Boot Menu Displays the list of available BIOS boot options (marked with asterisks). Select the boot optionyou wish to use and press .UEFI Boot Menu Displays the list of available UEFI boot options (marked with asterisks). Select the boot optionyou wish to use and press . The UEFI Boot Menu enables you to Add Boot Option,Delete Boot Option, or Boot From File.Driver Health Menu Displays a list of the drivers installed on the system and their health status.Launch System Setup Enables you to access the System Setup.System Utilities Enables you to access the BIOS Update File Explorer, run the Dell Diagnostics program, andreboot the system.UEFI Boot MenuMenu Item DescriptionSelect UEFI BootOptionDisplays the list of available UEFI boot options (marked with asterisks), select the boot optionyou wish to use and press .Add Boot Option Adds a new boot option.Delete Boot Option Deletes an existing boot option.Boot From File Sets a one-time boot option not included in the boot option list.Embedded System ManagementThe Dell Lifecycle Controller provides advanced embedded systems management throughout the server’s lifecycle. TheLifecycle Controller can be started during the boot sequence and can function independently of the operating system.NOTE: Certain platform configurations may not support the full set of features provided by the Lifecycle Controller.For more information about setting up the Lifecycle Controller, configuring hardware and firmware, and deploying theoperating system, see the Lifecycle Controller documentation at support.dell.com/manuals.iDRAC Settings UtilityThe iDRAC Settings utility is an interface to setup and configure the iDRAC parameters using UEFI. You can enable ordisable various iDRAC parameters using the iDRAC Settings Utility.NOTE: Accessing some of the features on the iDRAC Settings Utility requires the iDRAC7 Enterprise Licenseupgrade.For more information on using iDRAC, see theiDRAC7 User's Guide under Software → Systems Management → DellRemote Access Controllers, at support.dell.com/manuals.Entering The iDRAC Settings Utility1. Turn on or restart the managed system.2. Press during Power-on Self-test (POST).30
