Table 1. Internal Drive Capacity and Available Physical CapacityDR Series System Drive Capacity Available Physical Capacity (Decimal) Available Physical Capacity (Binary)3 TB (DR4100 system only) 26.79 TB 23.8 TiB2 TB 17.9 TB 15.9 TiB1 TB 8.89 TB 7.9 TiB600 GB 5.29 TB 4.6 TiB300 GB 2.47 TB 2.2 TiBFor more information about the external data storage capacity supported by the addition of expansion shelf enclosures,see the following sections in theDell DR Series System Administrator Guide:•DR Series Expansion Shelf•DR Series System and Data Operations•Drive and Available Physical CapacitiesNOTE: The DR4100 system ships with system software Release 2.0 or higher version installed. Any references inthis document to versions earlier than 2.0 would apply to DR4000 system configurations. Any enhancements madeto Release 1.x configurations are by default carried over into the 2.0 releases, and can be upgraded to the 2.0Release version of the system software.Accessing the DR Series System CLI CommandsTo access the DR Series system CLI commands from the system CLI prompt, complete the following:1. Launch a terminal emulation application and start the process for logging in to the DR Series system.2. In Host Name (or IP address), type the host name or IP address for the DR Series system, and click Open.3. At the system prompt, enter the username for the Administrator:– Type administrator– Press <Enter>4. At the administrator password prompt, enter the password for the Administrator (the default is St0r@ge!):– Type St0r@ge!– Press <Enter>The DR Series system administrator prompt is displayed.5. At the administrator prompt, type help.The DR Series system CLI commands are displayed.administrator@mydr4000 > helpDR4000/DR4100 Helpalerts View system events and configure email notifications.authenticate Configure Active Directory (AD) authentication.connection Configure CIFS or NFS access to a container.container Configure a filesystem to share over CIFS or NFS.diagnostics Gather log information for support issues.15
