system --rebootDescriptionReboots a DR Series system when you provide the required “administrator” password for the system.Syntaxsystem --rebootResultPlease enter administrator password:Broadcast message from root (pts/0) (Wed Jun 20 11:00:58 2012):The system is going down for reboot NOW!system --shutdownDescriptionShuts down a DR Series system when you use this command and provide the required password.CAUTION: The system --shutdown command powers off the appliance on which the DR Series system software isinstalled. Once the appliance is in a powered off state, you may only be able to power on the appliance in twoways: at its physical location, or by using an iDRAC connection on the network.Syntaxsystem --shutdownResultPlease enter administrator password:Broadcast message from root (pts/0) (Wed Oct 20 11:00:58 2012):The system is being shutdown NOW!system --upgradeDescriptionUpgrades the version of the DR Series system software installed on a supported DR Series hardware appliance.Syntaxsystem --upgradeNOTE: To obtain the latest DR Series system upgrade image, navigate to the Dell Support website (dell.com/support/drivers/us/en/19/Product/dell-DRSeries), and download the latest DR Series system software upgradeimage file to the local system using WinSCP.NOTE: Prior to performing a DR Series system CLI-based upgrade, make sure to download the DR Series systemupgrade image. To initiate a DR Series system software upgrade for Windows users using the DR Series systemCLI, the system software upgrade image file (in tar.gz format) is validated by the DR Series system, renamed toDRSeries_payload.tar.gz, and transferred to a directory/store location known to the DR Series system.When you use the DR Series system CLI system --upgrade command, the DR Series system looks in this knowndirectory/store location for the DRSeries_payload.tar.gz file, and starts the system software upgrade process.71
