Troubleshooting 141NOTE: The next steps change the boot sequence for one time only. On thenext start-up, the computer boots according to the devices specified in thesystem setup program.3 When the boot device list appears, highlight CD/DVD/CD-RW and press.4 Select the Boot from CD-ROM option from the menu that appears andpress .5 Type 1 to start the Resource CD menu and press to proceed.6 Select Run the 32 Bit Dell Diagnostics from the numbered list. Ifmultiple versions are listed, select the version appropriate for yourcomputer.7 When the Dell Diagnostics Main Menu appears, select the test you wantto run.Dell Diagnostics Main Menu1 After the Dell Diagnostics loads and the Main Menu screen appears, clickthe button for the option you want.NOTE: It is recommended that you select Test System to run a complete test onyour computer.2 After you have selected the Test System option from the main menu, thefollowing menu appears:NOTE: It is recommended that you select Extended Test from the menu below torun a more thorough check of devices in the computer.Option FunctionTest Memory Run the stand-alone memory testTest System Run System DiagnosticsExit Exit the DiagnosticsOption FunctionExpress Test Performs a quick test of devices in thesystem. This typically can take 10 to 20minutes.
