Dell Precision WorkStation 210 User Manual

Also see for Precision WorkStation 210: Quick reference guide User guide

Contents

ISA Configuration Utility Messages C-9WARNING: Could notconfigure Plug andPlay Card Name.WARNING: Could notconfigure PCI device,ID=DeviceID.Failed to configureNumber of Total CountPlug and Play ISAdevices. Use yoursystem’s configura-tion utility toresolve conflicts.Press any key tocontinue.The card(s) mentioned arenot fully configured dueto resource conflicts.If you have documentation that lists the allow-able resource values for your Plug and Play orPCI expansion card, you can use the followingprocedure to locate and resolve the resourceconflict.NOTE: If you do not have documentation list-ing the allowable resource values, see thecorrective action for these messages on thefollowing page.1. Start the ICU.Any Plug and Play or PCI expansion cardsthat could not be configured should bemarked config err in the list of cardsin the ICU window.2. Select the System Resources optionfrom the View menu.The System Resource Usage dialog boxdisplays all resources currently used bythe system.3. Select one of the resources used by yourPlug and Play or PCI expansion card, andclick the Used By Card button.The Card Resources Usage dialog boxidentifies which device is using theresource.4. Repeat step 3 until you have identified allconflicting resources and the cards thatuse them.5. Modify the cards as needed to free theresources required by the unconfiguredPlug and Play or PCI expansion card.See “Modifying a Card” in Chapter 4 forinstructions.7DEOH & &RQILJXUDWLRQ 0DQDJHU 0HVVDJHV FRQWLQXHG0HVVDJH 3UREDEOH &DXVH &RUUHFWLYH $FWLRQNOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary.