106 Using Your ProjectorProjector Control PanelProjector Information• Projector Status: There are five states: Lamp On, Standby, Power Saving,Cooling, and Warming up. Click Refresh to refresh the status and controlsettings.• Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes. Formore information, see "Power Saving" on page 68.• Alert Status: There are three alert states: Lamp warning, Low lamp life, andTemperature warning. Your projector might lock up in the protection modeif any of the alerts are activated. To exit the protection mode, click Clear toclear the Alert Status before you power on your projector.
