Using Your Projector 113Projector Status and Control Page• Projector Status: There are 5 status: Lamp On, Standby, Power Saving,Cooling, and Warming up. Click the Refresh button to refresh the statusand control settings.• Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes.Refer to page 68.• Alert Status: There are three error status: Lamp warning, Low lamp life, andTemperature warning. Your projector might lock up in protection mode ifany of the alerts is activated. To exit protection mode, click the Clear toclear the Alert Status before you could Power ON your projector.• Projector Mode: Allows you to select the projector mode, depending on howthe projector is mounted. There are four projection modes: FrontProjection-Desktop, Front Projection-Wall Mount, Rear Projection-Desktopand Rear Projection-Wall Mount• Source Select: The Source Select menu allows you to select your projector'sinput source. You can select VGA-A, VGA-B, S-Video, Composite Video,HDMI, Wireless Display, USB Display, or USB Viewer.• Video Mode: Select a mode to optimize the display image based on how theprojector is being used:- Presentation: Best for presentation slides.
